| Getting Started | 37Querying the DHCP ServerThe system is capable of querying a DHCP (Dynamic Host Configuration Protocol) server. After establishing networkconnectivity, the system can obtain the following network parameters from the DHCP server during initialization:• IP Address• Subnet Mask• Default Gateway• Primary DNS (Domain Name Server)• Secondary DNSBy default, the system obtains these parameters from a DHCPv4. If the DHCP server does not supply some of theabove parameters, you can configure them manually.Running the Setup WizardThe setup wizard appears on the monitor when you initialize the system for the first time or when you reset thesystem to factory.Tip:You can run the setup via your remote control or CTP20.You can also tap Exit Boot Wizard on your CP960 conference phone to skip the setup wizard.You can configure the following features according to the setup wizard.Menu DescriptionLanguage Set the language displayed on the CP960 conference phone/CTP20/themonitor. The default language is Simplified Chinese.Date & Time The system obtains the time and date from the NTP server automatically bydefault. You can also configure the time and date manually.Site Name Edit the site name.Password The default administrator password is “0000”. For security reasons, youshould change it as soon as possible. The new password must be at least sixcharacters, preferably mixing with digits and letters.Firewall Port Mapping Displays the firewall port mapping information.Wired Network Your system can obtain the network settings from a Dynamic HostConfiguration Protocol (DHCP) server. You can also configure networksettings manually.Wi-Fi(Only applicable to VC200/VP59)Connects to Wi-Fi.Account Optional: Log into the video conferencing platform.Your system supports Yealink VC Cloud/Yealink Meeting Server/StarLeaf/Zoom/Pexip/BlueJeans/EasyMeet/Custom platform.