| Configuration Methods | 39On your VC200, go to More > Network > Wired Network > Advanced Network > Web Server Type.On your VP59, tap Setting > Advanced > Advanced Network > Web Server Type.• On your CTP20, tap Setting > Advanced > Advanced Network > Web Server Type.2. Configure and save the following settings:Parameter Description Configuration MethodHTTP Enable or disable the user to access the web userinterface via the HTTP.Default: On.Web user interfaceEndpointCTP20HTTP Port Specify the HTTP port for the user to access theweb user interface.Valid value: Any integer from 1 to 65535.Ensure that the configured port is not occupied.Default: 80Web user interfaceHTTPS Enable or disable the user to access the web userinterface by using the HTTPS.Default: On.Web user interfaceEndpointCTP20HTTPS port Specify the HTTPs port for the user to access theweb user interface.Valid value: Any integer from 1 to 65535.Make sure that the configured port is available.Default: 443Web user interfaceHTTP &HTTPS Enable or disable the user to access the web userinterface via the HTTP and HTTPS.Default: On.CTP20VP59Off Disable the user to access the web user interfacevia the HTTP and HTTPS.Default: Off.CTP20VP59Using VCR11 Remote ControlYou can use the real remote control or the virtual remote control to configure and use the system. You can disable theremote control if it is not needed or not available.VCR11 Remote Control is not applicable to VP59.• Using the Virtual Remote Control• Customizing the Key Type• Disabling Remote Control Keys• Disabling the Remote Control
