| Configuring Network Settings | 68Parameter Description Configuration MethodIdentity Configure the user name for802.1x authentication.Note: the default value is blank.If you change this parameter, thesystem will reboot to make thechange take effect.Web user interfaceMD5 Password Configure the password for802.1x authentication.Note: the default value is blank.If you change this parameter, thesystem will reboot to make thechange take effect.Web user interfaceCA Certificates Upload the CA certificates.Note: upload the CA certificateswhen the 802.1x authenticationmode is configured as EAP-TLS,PEAP-MSCHAPv2, or EAP-TTLS/EAP-MSCHAPv2.If you change this parameter, thesystem will reboot to make thechange take effect.Web user interfaceDevice Certificates Upload the device certificates.Note: Configure the access URLof the server certificate when the802.1x authentication mode isconfigured as EAP-TLS.If you change this parameter, thesystem will reboot to make thechange take effect.Web user interfaceNetwork Speed and Duplex ModeYou can configure the network speed and duplex mode the system uses. The network speed and duplex mode youselect for the system must be supported by the switch.VP59 allows you to configure the speed of Internet port and PC port.• Supported Transmission Methods• Configuring Transmission MethodsSupported Transmission MethodsThe supported transmission methods for VC880/VC800/VC500/PVT980/PVT950 system’s Internet port are listedbelow:• Auto