| Configuring Camera Settings | 161Parameter Description Configuration MethodFECC (SIP) Enable or disable the FECC(SIP) protocol for the far site tocontrol the near camera.Note:For Zoom/Pexip/BlueJeans/EasyMeet/Videxio/Custom andSIP IP call, BFCP is enabled bydefault.For SIP account, the defaultvalue is off.Web user interfaceConfiguring the Far Site to Control the Near CameraYou can enable this feature to allow the remote to control your local camera, so that the image captured by the localcamera can be displayed properly on the remote monitor. This feature is not applicable to VP59.Procedure1. Do one of the following:• On your web user interface, go to Setting > Video & Audio > Far Control Near Camera.• On your VCS, go to More > Setting > Video & Audio.• On your CTP20, tap Setting > Camera > Far Control Near Camera.2. Configure and save the following settings:Parameter Description Configuration MethodFar Control Near Camera Enable or disable the far site tocontrol the near-site camera.Default: On.Web user interfaceRemote controlCTP20Setting the Camera PresetsThe camera presets store the setting of the angle and the focal length. The camera presets can help you quickly pointa camera at pre-defined locations. The camera presets can remain in effect until you change them. This feature is notapplicable to VP59.Procedure1.On your web user interface, go to Home > Yourself > .
