| Configuring Camera Settings | 155Configuring the Mode of WDR-AutoWDR mode is not applicable to VC200.Procedure1. Do one of the following:• On your web user interface, go to Setting > Camera > Exposure.• For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera Setting > Exposure.• On your CTP20, tap Setting > Camera > Exposure.2. Select WDR-Auto from the drop-down menu of Exposure Mode.3. Configure and save the following settings:Parameter Description Configuration MethodExposureCompensation Configure the value of exposurecompensation.The exposure compensation is used tocompensate the camera effectively whenthe camera is shooting in a backlightenvironment. If the environment light isdark, you can increase the compensationvalue.Note: the valid value is from -6 to 6. Thedefault value is 0.Web user interfaceEndpointCTP20Configuring WDR-ManualWDR-Manual mode is not applicable to VC200.Procedure1. Do one of the following:• On your web user interface, go to Setting > Camera > Exposure.• For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera Setting > Exposure.• On your CTP20, tap Setting > Camera > Exposure.2. Select WDR-Auto from the drop-down menu of Exposure Mode.3. Configure and save the following settings:Parameter Description Configuration MethodExposureCompensation Configure the value of exposurecompensation.The exposure compensation is used tocompensate the camera effectively whenthe camera is shooting in a backlightenvironment. If the environment light isdark, you can increase the compensationvalue.Valid value: from -6 to 6. Default: 0.Web user interfaceEndpointCTP20
