| Configuring Basic Settings | 99Setting the LanguageYou can specify a language displayed in the monitor and the web user interface respectively. The CP960 conferencephone will detect and use the same language as the monitor.Procedure1. Do one of the following:• On your web user interface, click Language at the top of the web page.• On your VCS, go to More > Setting > Basic > Language.On your VP59, tap Setting > Basic > Language.• On your CTP20, tap Setting > Basic > Language.2. Select the desired language.3. Save the change.Enabling/Disabling the ClockAfter you enable the clock, the time and date are displayed at the center of the Home page. This feature is onlyavailable to VP59.Procedure1. Tap Setting > Basic.2. Enable/Disable Clock.Setting the Ring ToneYou can set the ring tone for VP59, and the ring tone is available to all accounts registered on VP59.Procedure1. Tap Setting > Basic > RingTone.2. Select the desired ring tone.3. Save the change.Configuring Key ToneYou can enable the key tone feature. When you press any key on the remote control or tap the onscreen dial pad onthe CP960 conference phone, the system will produce a sound. For VP59, when you press any key on the phone or tapany key on the Dial page, the device will produce key tone.Procedure1. Do one of the following:• On your web user interface, go to Setting > General > General Information > Key Tone.• On your VCS, go to More > Setting > Basic > Key Tone.On your VP59, tap Setting > Basic > Key Tone.• On your CTP20, tap Setting > Basic > Key Tone.