| Managing the Directory | 179Adding a Local ContactYou can add 500 local contacts to your system at most.Procedure1. Do one of the following:• On your web user interface, go to Directory > Local Directory > New Contact.If you import the multipoint license to the device, on your web user interface, click Directory > LocalDirectory > New Contact > Local.• On your VCS, go to Dial > Directory > Local > New Contact.On your VP59, tap Dial > .• On your CTP20, go to Dial > .Select Add Local Contact from the pop-up dialog if the multipoint license is imported to the device.2. Configure and save the following settings:Parameter Description Configuration MethodName Configure the contact name. Web user interfaceEndpointCTP20Number Configure the contact number. Web user interfaceEndpointCTP20Add New Number You can add up to 3 numbers forthe local contact. EndpointCTP20Bandwidth Select the desired bandwidthfrom drop-down menu of Callbandwidth.The default value is Auto, whichmeans the system will selectthe appropriate bandwidthautomatically.Note: When you call a localcontact, the call rate that applies(video call rate or bandwidth)is the rate with the lower value.For more information, refer toSpecifying the Video Call Rate.Web user interfaceEndpointCTP20Adding a Conference ContactYou can add 100 conference contacts at most.About this taskNote: Adding Conference contact is only applicable to VC880/VC800/PVT980/PVT950 system with amultipoint license. It is not applicable to VC500/VC200.
