| Configuring Network Settings | 71Data QoSTo ensure better presentation, data packets (PC content) emanated from the system should be configured with a hightransmission priority. DSCPs for audio, video and data packets can be specified respectively.• Configuring QoSConfiguring QoSProcedure1. Do one of the following:• On your web user interface, go to Network > Advanced > QoS.• On your VCS:For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Advanced Network >QoS.On your VC200, go to More > Network > Wired Network > Advanced Network > QoS.On your VP59, tap Setting > Advanced > Advanced Network > QoS.• On your CTP20, tap Setting > Advanced > Advanced Network > QoS.2. Configure and save the following settings:Parameter Description Configuration MethodQoS Enable or disable the QoSfeature.Note: the default value is Off.If you change this parameter, thesystem will reboot to make thechange take effect.Web user interfaceEndpointCTP20Audio Priority Configure the DSCP(Differentiated Services CodePoint) for audio packets.Note: the default value is 63.The greater the number is, thehigher the priority is. If youchange this parameter, thesystem will reboot to make thechange take effect.Web user interfaceEndpointCTP20Video Priority Configure the DSCP(Differentiated Services CodePoint) for video packets.Note: the default value is 34.The greater the number is, thehigher the priority is. If youchange this parameter, thesystem will reboot to make thechange take effect.Web user interfaceEndpointCTP20