| Configuring the Meeting Room | 173Conference TypesYealink video conferencing system can act as a virtual meeting room, so that other devices can dial the system to joina meeting. This feature is not applicable to VP59.The video conferencing system supports the following two conference types:Conference Types Supported Model Difference Multipoint AllocationRegular Mode VC800/VC500/VC200/PVT980/PVT950Virtual meeting room 1:when participants call thevirtual meeting room 1,the moderator also joinsthe meeting.For VC880/VC800/VC500/VC200, up to 1video call and 5 voicecalls. For PVT980, up to8 video calls and 5 voicecalls. For PVT950, up to4 video calls and 5 voicecalls.Virtual meeting room 1:when participants call thevirtual meeting room 1,the moderator also joinsthe meeting.VMR Mode VC800/VC880 with amultipoint licenseVirtual meeting room 2:when participants call thevirtual meeting room 2,only participants join themeeting, the moderatordoes not join the meeting.The total MCU ways ofthe two virtual meetingrooms are depended onthe multipoint licenseyou imported. Youcan allocate the MCUways between twovirtual meeting roomsrespectively.• Regular Mode Conference• VMR Mode ConferenceRelated informationMultipoint LicensesRegular Mode ConferenceFor regular mode conference, virtual meeting room 1 is available.• Selecting Regular Mode ConferenceSelecting Regular Mode ConferenceProcedure1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.2. Select Regular Mode from the drop-down menu of Conference Type.VMR Mode ConferenceIn VMR mode conference, MCU can be used to host two independent conferences, corresponding to virtual meetingroom 1 and virtual meeting room 2. This feature is only applicable to VC800/VC880.
