| Configuration Methods | 40Using the Virtual Remote ControlYou can use the virtual remote control via your web user interface to control your system.Procedure1. On your web user interface, go to Home > Remote Control.The virtual remote control appears.2. Click the corresponding keys on the remote control to control the system.3. Click Remote Control to close the virtual remote control.Customizing the Key TypeYou can configure the custom key ( ) on the remote control to the desired functions as needed.Procedure1. On your web user interface, go to Setting > Remote Control > Remote Control > Custom Key Type.2. Configure and save the following settings:Parameter Description Configuration MethodCustom Key Type Specify a feature for the customkey on the remote control.• Input: press to select thevideo input source.• ScreenShot: press to capturescreen.• Mute Speaker: press to muteor unmute the speaker.• Presentation: press to startor stop presentation.• Preset: press to configure thepresets during a call.Default: Presentation.Web user interfaceDisabling Remote Control KeysAll keys on the remote control are enabled by default. If you do not want to use some keys on the remote control, youcan disable them.Procedure1. On your web user interface, go to Setting > Remote Control.2. In the Enable Remote Control Key field, turn off the corresponding key.3. Click Confirm.Disabling the Remote ControlThe remote control feature is enabled by default. If your environment does not use remote control to control thesystem, you can disable it.Procedure1. On your web user interface, go to Setting > General > General Information > Remote Control Enabled.