| System Maintenance | 217Parameter Description Configuration MethodSyslog Level Specify the level of sysloginformation that displayed in thesyslog.0-system is unusable1-action must be takenimmediately2-critical condition3-error conditions4-warning conditions5-normal but significantcondition6-informationalNote: the default value is 6.Higher value indicates moredetailed content.Web user interfaceSyslog Facility Configure the facility thatgenerates the log messages.Default: Local Use 0.Web user interfaceSyslog Prepend Mac Enable or disable syslog prependMac.Default: Off.Web user interfaceNote:The severity level of the exported Module Log will not be greater than the Syslog Level. For example, ifyou set Syslog Level as 3 and set Talk log Level as 6, the exported Talk log Level will still be 3. If you setLocal Log Level as 5 and set Talk log Level as 4, the exported Talk log Level will be 4.Capturing PacketsYou can capture packets in three ways: capturing the packets via web user interface, on the remote control or usingthe Ethernet software. You can analyze the packet captured for troubleshooting.• Capturing the Packets via Web User Interface• Capturing the Packets via Remote Control• Capturing the Packets via Ethernet SoftwareCapturing the Packets via Web User InterfaceYou can capture the packets via the web user interface. You can also download the captured packets to your computer.The video conferencing system supports the following two modes for capturing packets:• Enhanced: directly exporting the packets file to local PC while capturing.• Normal: manually exporting the packets file to local PC after stopping capturing.• Capturing the Packets in Enhanced Way• Capturing the Packets in Normal Way
