| Configuring Call Settings | 169• For your VC880/VC800/VC500/VC200/PVT980/PVT950, on your remote control, click More > Setting >Call Feature > Auto Answer Multiway.• On your CP960 conference phone, swipe down from the top of the screen to enter the control center.• On your CTP20, tap Setting > Basic > Auto Answer Multiway.2. Configure and save the following settings:Parameter Description Configuration MethodAuto Answer Multiway Enable or disable the systemto answer a call automaticallywhen the system is already in acall.Default: Off.Web user interfaceEndpointCTP20Muting Auto-Answered CallsThe Auto Answer Mute feature allows the system to turn off the microphone when an incoming call is answeredautomatically. This avoids the caller hearing the local conversation freely.Procedure1. Do one of the following:• On your web user interface, go to Setting > Call Features > Auto Answer Mute.• For your VC880/VC800/VC500/VC200/PVT980/PVT950, on your remote control, go to More > Setting >Call Feature > Auto Answer Mute.• On your CTP20, tap Setting > Basic > Auto Answer Mute.2. Configure and save the following settings:Parameter Description Configuration MethodAuto Answer Mute Enable or disable the localmicrophone to be muted whenan incoming call is answeredautomatically.Note: the default value is On.Only the Auto Answer Mutefeature is enabled can thisfeature be available.Web user interfaceEndpointCTP20Related informationAuto AnswerMuting Auto-Dialed CallsThe Auto Dialout Mute feature allows the system to turn off the microphone after the other party answers your call, sothat the other party cannot hear you.About this taskNote: The system is still muted after you hang up.