| Getting Started | 14Port Name Description③ USB • Connect to a USB flash driveInsert a USB flash drive for storing screenshots, recording videos or capturingpackets. If multiple USB flash drives are connected, only the latter one can beidentified.• Insert a WF50 Wi-Fi USB Dongle for connecting to Wi-Fi or providingwireless AP.• Insert a BT42 Bluetooth USB Dongle for connecting to the CPW90-BTBluetooth wireless microphones.• Insert a PSTN box CPN10 for connecting to the PSTN (Public SwitchedTelephone Network).④ Camera Port Connect to a third-party camera.⑤ RCA In Connect to an audio input device via a RCA cable.⑥ RCA Out Connect to an audio output device via a RCA cable.⑦ Display Connect to a monitor for displaying video images.⑧ VC Hub/Camera • If you want to use wired sharing to present, connect this port to the Codec porton the VCH50 video conferencing hub.• Connect this port to the Camera port on theVCC22 video conferencingcamera.• If you need an audio device, connect this port to the Internet port on theCP960 Conference phone.⑨ Internet Connect to the network device.⑩ DC48V Connect to the power source via a power adapter.⑪ Slot hole Use the screws to lock the PVT980 system to the rack.Hardware of VC800 CodecVC800 codec compresses the outgoing video and audio data, transmits the data to the far site, and decompresses theincoming data.Supporting 16:9 and 4:3 aspect ratios, it is compatible with different audio devices, and can adapt to the monitorsautomatically. The VC800 camera can be panned (± 100 degrees range), tilted (± 30 degrees range) and supports 12 xoptical zoom, white balance, automatic gain and so on.• Front Panel of VC800 Codec
