| Configuring the Meeting Room | 175Meeting PasswordDepending on how a conference call is set up, you might be required to enter a meeting password to join aconference. You can also require the far site to enter a meeting password to prevent unauthorized participants fromjoining conference calls hosted by your system.If you host a regular mode conference, you need to configure a password for virtual meeting room 1. If you host aVMR mode conference, you need to configure passwords for virtual meeting room 1 and virtual meeting room 2respectively. This feature is not applicable to VP59.• Configuring Meeting PasswordConfiguring Meeting PasswordProcedure1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.2. Configure and save the following settings:Parameter Description Configuration MethodVirtual Meeting Room 1->Meeting Password Enable or disable the system toconfigure a password for virtualmeeting room1.Default: Off.Web user interfaceVirtual Meeting Room 1->Meeting Room 1 Password Configure the password forvirtual meeting room 1.Valid Value: 1 to 10, defaultvalue: 6.Web user interfaceVirtual Meeting Room 2->Meeting Password Enable or disable the system toconfigure a password for virtualmeeting room 2.Note: the default value is Off.Only when the meeting roomtype is VMR mode can thisparameter be configured.Web user interfaceVirtual Meeting Room 2->Meeting Room 2 Password Configure the password forvirtual meeting room 2.Valid Value: 1 to 10, defaultvalue: blank.Only when the meeting roomtype is VMR mode can thisparameter be configured.Web user interfaceRelated informationJoining the MeetingConference Types