| Configuring Network Settings | 63• On your VCS:For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.On your VC200, go to More > Network > Wi-Fi > Wi-Fi.On your VP59, tap Setting > Network & Connection > Wi-Fi.• On your CTP20, tap Setting > Advanced > Wired Network > Wireless Network.2. Select the connected wireless network.3. Select Forget the Network.Disabling the Wi-Fi FeatureProcedure1. Do one of the following:• On your web user interface, go to Network > Wi-Fi > Wi-Fi Config > Wi-Fi.• On your VCS:For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.On your VC200, go to More > Network > Wi-Fi > Wi-Fi.On your VP59, tap Setting > Network & Connection > Wi-Fi.• On your CTP20, tap Setting > Advanced > Wired Network > Wireless Network.2. Disable the Wi-Fi.Wireless Access PointFor VC880/VC800/VC500/PVT980/PVT950: you need to connect a WF50 Wi-Fi USB Dongle to the system forproviding the wireless AP. VC200/VP59 can provide wireless AP directly.• Enabling the Wireless Access Point• Configuring Wireless Access Point• Viewing the Connected Devices• Adding Connected Devices to the Blacklist• Removing Devices from the Blacklist• Disabling the Wireless Access PointEnabling the Wireless Access PointProcedure1. Do one of the following:• On your web user interface, go to Network > Wireless AP.• On your VCS:For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wireless AP.On your VC200, go to More > Network > Wireless AP.On your VP59, tap Setting > Network & Connection > Wireless AP.• If CTP20 is wired to the device, on your CTP20, tap Setting > Advanced > Wired Network > Wireless AP.2. Enable the Wireless AP.3. If you already enabled Wi-Fi, select OK to turn it off.
