| Managing the Directory | 188• On your web user interface, go to Directory > Local Directory.Click on the right.Click or to place a video or voice call.• On your VCS, go to Dial > Directory.Select the desired contact and then press the right navigation key.Select Video Call or Voice Call.On your VP59, tap Dial.Tap the desired contact.If you want to place a voice call, long tap beside the desired contact, and then select Voice Call.• On your CP960 conference phone, tap Directory.Tap after the desired contact.Tap Video Call or Voice Call.• On your CTP20, go to Dial.Tap the desired contact.If you want to place a voice call, long tap beside the desired contact, and then select Voice Call.Meeting WhitelistYou can add meeting whitelist. The users in the whitelist can join your conference call directly without meetingpassword even if you have enabled the meeting password feature. Your system supports up to 100 whitelist records.This feature is not applicable to VP59.• Adding Meeting Whitelist• Deleting the Meeting WhitelistAdding Meeting WhitelistThe users in the whitelist can call you without the password.Procedure1. On your web user interface, go to Directory > Meeting Whitelist.2. Enter the desired number.The value can be the IP address, the account number, or the domain name.3. Click Add.Note:Users in the whitelist can join virtual meeting room 1 of conference moderator without a password. Ifconference moderator hosts a VMR mode conference, users in the whitelist still need password to joinvirtual meeting room 2.
