| Configuring Camera Settings | 151Parameter Description Configuration MethodWDR/WideDynamic Range Specify the WDR. The value represents thecompression degree of the dynamic range.Cameras with WDR technology can workperfectly both in the bright and the darkconditions and present clear images thatbalances different lighting, so that you canidentify the details.• Off-do not use WDR.• 1~5Default: 2.Web user interfaceEndpointCTP20Configuring the Mode of Shutter PriorityProcedure1. Do one of the following:• On your web user interface, go to Setting > Camera > Exposure.• On your VCS:For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.On your VC200, go to More > Setting > Video & Audio > Exposure.• On your CTP20, tap Setting > Camera > Exposure.2. Select Shutter Priority as the Exposure Mode.3. Configure and save the following settings:Parameter Description Configuration MethodShutter Configure the value of the shutter.Valid Value: 1/60, 1/90, 1/100, 1/125,1/180, 1/250, 1/350/ 1/500, 1/725/, 1/1000,1/1500, 1/2000, 1/3000, 1/4000, 1/6000,1/10000Default: 1/100.Web user interfaceEndpointCTP20ExposureCompensation Configure the value of exposurecompensation.The exposure compensation is used tocompensate the camera effectively whenthe camera is shooting in a backlightenvironment. If the environment light isdark, you can increase the compensationvalue.Valid value: from -6 to 6. Default: 0.Web user interfaceEndpointCTP20Gain/Gain Limit Specify the value.Valid value: from 1 to 15. Default: 4.Web user interfaceEndpointCTP20