ABB OmniCore IRB 6740 Product Manual

4.4.4 Changing the oil in axis-3 gearboxLocation of the gearbox and oil plugsThe gearbox and its oil plugs are located as shown in the figure.xx2300000143Oil plug with nipple for draining and filling with an oil dispenserAOil plug hole for venting and inspectionBRequired tools and equipmentNoteArticle numberEquipmentThe capacity of the vessel mustbe sufficient to take the completeamount of oil.-Oil collecting vesselOne example of oil dispenser canbe found in section Type of lubric-ation in gearboxes on page 135.-Oil dispenserContent is defined in sectionStandard toolkit on page 652.-Standard toolkitRequired consumables and wear partsNoteArticle numberWear partSee Type of lubrication in gearboxeson page 135.-Lubricating oilUsed on oil plug. Always replace whenrefitting oil plug.3HAC061327-059O-ring, G 1/2"Required documentsNoteDocument numberDocument name3HAC042927-001Technical reference manu-al - Lubrication in gearboxesContinues on next pageProduct manual - IRB 6740 1473HAC085701-001 Revision: A© Copyright 2023 ABB. All rights reserved.4 Maintenance4.4.4 Changing the oil in axis-3 gearbox