Placing separator sheets between copies1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF. Place these items on the scanner glass.2 If you are loading a document into the ADF, then adjust the paper guides.3 On the home screen, touch Copy.4 Touch Options.5 Touch Separator Sheets.Note: Collate must be On for the separator sheets to be placed between copies. If Collate is Off, the separatorsheets are added to the end of the print job.6 Select one of the following:• Between Copies• Between Jobs• Between Pages7 Touch Done.8 Touch Copy It.Copying multiple pages onto a single sheetIn order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a singlesheet of paper.Notes:• The Paper Size must be set to Letter, Legal, A4, or B5 JIS.• The Copy Size must be set to 100%.1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF. Place these items on the scanner glass.2 If you are loading a document into the ADF, then adjust the paper guides.3 On the home screen, touch Copy.4 Select a duplex setting.5 Touch Options.6 Touch Paper Saver.7 Select the desired output.8 Touch Print Page Borders if you want a box drawn around each page of the copies.9 Touch Done.10 Touch Copy It.Copying110