Viewing reportsYou can view some reports from the Embedded Web Server. These reports are useful for assessing the status of theprinter, the network, and supplies.To view reports from a network printer:1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP addressin the TCP/IP section.2 Click Reports, and then click the type of report you want to view.Restoring the factory default settingsIf you want to retain a list of the current menu settings for reference, then print a menu settings page before yourestore the factory default settings. For more information, see “Printing a menu settings page” on page 52.Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory defaultsetting. Exceptions include the display language, custom sizes and messages, and Network/Port menu settings. Alldownloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.1 Make sure the printer is on and Ready appears.2 On the home screen, touch .3 Touch Settings.4 Touch General Settings.5 Touch the down arrow until Factory Defaults appears.6 Touch the left or right arrow until Restore Now appears.7 Touch Submit.8 Touch .Administrative support239