Connecting to an analog telephone lineIf your telecommunications equipment uses a US-style (RJ11) telephone line, then follow these steps to connect theequipment:1 Connect one end of the telephone cable that came with the printer to the printer LINE port .2 Connect the other end of the telephone cable to an active analog telephone wall jack.Connecting to a DSL serviceIf you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and thenfollow these steps to connect the equipment:1 Connect one end of the telephone cable that came with the printer to the printer LINE port .2 Connect the other end of the telephone cable to the DSL filter.Note: Your DSL filter may look different than the one in the illustration.3 Connect the DSL filter cable to an active telephone wall jack.Faxing126