Menu item DescriptionDuplex BindingLong EdgeShort EdgeDefines the way duplexed pages are bound and how the printing on the back ofthe page is oriented in relation to the printing on the front of the pageNotes:• Long Edge is the factory default setting.• Long Edge specifies that binding be placed on the left edge of portrait pagesand the top edge of landscape pages.• Short Edge specifies that binding be placed on the top edge of portrait pagesand the left edge of landscape pages.Copies1–999Specifies a default number of copies for each print jobNote: 1 is the factory default setting.Blank PagesDo Not PrintPrintSpecifies whether blank pages are inserted in a print jobNote: Do Not Print is the factory default setting.CollateOff (1,1,1,2,2,2)On (1,2,1,2,1,2)Stacks the pages of a print job in sequence when printing multiple copiesNotes:• Off is the factory default setting.• The On setting stacks the print job sequentially.• Both settings print the entire job the number of times specified by the Copiesmenu setting.Separator SheetsNoneBetween CopiesBetween JobsBetween PagesSpecifies whether blank separator sheets are insertedNotes:• None is the factory default setting.• Between Copies inserts a blank sheet between each copy of a print job ifCollation is set to On. If Collation is set to Off, a blank page is inserted betweeneach set of printed pages, such as after all page 1's and after all page 2's.• Between Jobs inserts a blank sheet between print jobs.• Between Pages inserts a blank sheet between each page of the print job. Thissetting is useful when printing transparencies or inserting blank pages in adocument for notes.Separator SourceTray Multi-Purpose FeederSpecifies the paper source for separator sheetsNotes:• Tray 1 (standard tray) is the factory default setting.• From the Paper menu, Configure MP must be set to Cassette in order forMulti-Purpose Feeder to appear as a menu setting.Understanding printer menus217
