Paper menuDefault Source menuMenu item DescriptionDefault SourceTray MP FeederEnvelope FeederManual PaperManual EnvSets a default paper source for all print jobsNotes:• Tray 1 (standard tray) is the factory default setting.• Only an installed paper source will appear as a menu setting.• A paper source selected by a print job will override the Default Sourcesetting for the duration of the print job.• If the same size and type of paper are in two trays and the Paper Size andPaper Type settings match, then the trays are automatically linked. Whenone tray is empty, the job prints using the linked tray.• From the Paper menu, Configure MP must be set to Cassette in order forMP Feeder to appear as a menu setting.Paper Size/Type menuConfigure MP menuMenu item DescriptionConfigure MPCassetteManualDetermines when the printer selects paper from the multipurpose feederNotes:• Cassette is the factory default setting.• The Cassette setting configures the multipurpose feeder as an automaticpaper source.• When Manual is selected, the multipurpose feeder can be used only formanual feed print jobs.Substitute Size menuMenu item DescriptionSubstitute SizeOffStatement/A5Letter/A4All ListedSubstitutes a specified paper size if the requested paper size is not availableNotes:• All Listed is the factory default setting. All available substitutions areallowed.• The Off setting indicates no size substitutions are allowed.• Setting a substitution lets the job print without a Change Paper messageappearing.Understanding printer menus157