Menu item DescriptionHex TraceActivateAssists in isolating the source of a print job problemNotes:• When Activate is selected, all data sent to the printer is printed in hexadecimaland character representation and control codes are not executed.• To exit or deactivate Hex Trace, turn the printer off or reset the printer.Coverage EstimatorOffOnProvides an estimate of the percentage coverage of black on a page. The estimateis printed on a separate page at the end of each print job.Note: Off is the factory default setting.XPS menuMenu item DescriptionPrint Error PagesOffOnPrints a page containing information on errors, including XML markup errorsNote: Off is the factory default setting.PDF menuMenu item DescriptionScale to FitYesNoScales page content to fit the selected paper sizeNote: No is the factory default setting.AnnotationsDo Not PrintPrintPrints annotations in a PDFNote: Do Not Print is the factory default setting.PostScript menuMenu item DescriptionPrint PS ErrorOnOffPrints a page containing the PostScript errorNote: Off is the factory default setting.Font PriorityResidentFlashEstablishes the font search orderNotes:• Resident is the factory default setting.• A formatted optional flash memory card must be installed in the printerand operating properly for this menu item to be available.• The optional flash memory card cannot be Read/Write, Write, or passwordprotected.• Job Buffer Size must not be set to 100%.Understanding printer menus220
