Using the Embedded Web Server for fax setup1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the addressin the TCP/IP section.2 Click Settings.3 Click Fax Settings.4 Click Analog Fax Setup.5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.6 Click inside the Station Number box, and then enter the printer fax number.7 Click Submit.Setting the date and timeYou can set the date and time so that they are printed on every fax you send. If there is a power failure, you may haveto reset the date and time.1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the addressin the TCP/IP section.2 Click Settings.3 Click Security.4 Click Set Date and Time.5 Click inside the Set Date & Time box, and then enter the current date and time.6 Click Submit.Turning daylight saving time on or offThe printer can be set to automatically adjust for daylight saving time for certain time zones:1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the addressin the TCP/IP section.2 Click Settings.3 Click Security.4 Click Set Date and Time.5 Select Automatically Observe DST.6 Click Submit.Faxing136
