Installing a printer hard diskNote: This task requires a #2 Phillips screwdriver and a flathead screwdriver.CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memorydevices sometime after setting up the printer, then turn the printer off, and unplug the power cord from thewall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,and unplug any cables going into the printer.Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touchsomething metal on the printer before touching any system board electronic components or connectors.1 Access the system board.2 Unpack the printer hard disk.Note: Avoid touching the components on the hard disk.3 Locate the appropriate connector on the system board.Note: If an optional ISP is currently installed, then the printer hard disk must be installed onto the ISP.Additional printer setup43