Menu item DescriptionSeparator SheetsNoneBetween CopiesBetween JobsBetween PagesPlaces a sheet of paper between pages, copies, or jobs based on the value selectedNote: None is the factory default setting.Separator Sheet SourceTray Manual FeederSpecifies a paper sourceBlank PagesDo Not PrintPrintSpecifies whether blank pages are inserted in a print jobNote: Do Not Print is the factory default setting.Print SettingsSetup menuMenu item DescriptionPrinter LanguagePCL EmulationPS EmulationPPDS EmulationSets the default printer languageNotes:• PCL emulation uses a PCL interpreter for processing printjobs. PostScript emulation uses a PS interpreter for processingprint jobs.• PCL is the factory default printer language.• Setting a printer language as the default does not prevent asoftware program from sending print jobs that use anotherprinter language.Print AreaNormalWhole PageSets the logical and physical printable areaNotes:• This menu does not appear if Edge to Edge is enabled in theprinter Setup menu.• Normal is the factory default setting. When attempting toprint data in the non-printable area defined by the Normalsetting, the printer clips the image at the boundary.• The Whole Page setting allows the image to be moved intothe non-printable area defined by the Normal setting, but theprinter will clip the image at the Normal setting boundary.• The Whole Page setting only affects pages printed using aPCL 5e interpreter. This setting has no effect on pages printedusing the PCL XL or PostScript interpreter.Understanding printer menus215
