Menu item DescriptionNetwork Number Lets you view the assigned NetWare network numberNote: This can be changed only from the Embedded Web Server.Select IPX Frame TypesEthernet 802.2Ethernet 802.3Ethernet Type IIEthernet SNAPEnables the Ethernet frame type settingNote: On is the factory default setting for all menu items.Packet BurstYesNoReduces network traffic by allowing the transfer and acknowledgement ofmultiple data packets to and from the NetWare serverNote: Yes is the factory default setting.NSQ/GSQ ModeYesNoSpecifies the NSQ/GSQ Mode settingNote: No is the factory default setting.Standard USB menuMenu item DescriptionPCL SmartSwitchOnOffSets the printer to automatically switch to PCL emulation when a print job receivedthrough a USB port requires it, regardless of the default printer languageNotes:• On is the factory default setting.• When the Off setting is used, the printer does not examine incoming data.• When the Off setting is used, the printer uses PostScript emulation if the PSSmartSwitch setting is On. It uses the default printer language specified in theSetup menu if the PS SmartSwitch setting is Off.PS SmartSwitchOnOffSets the printer to automatically switch to PS emulation when a print job receivedthrough a USB port requires it, regardless of the default printer languageNotes:• On is the factory default setting.• When the Off setting is used, the printer does not examine incoming data.• When the Off setting is used, the printer uses PCL emulation if the PCLSmartSwitch setting is On. It uses the default printer language specified in theSetup menu if the PCL SmartSwitch setting is Off.NPA ModeOnOffAutoSets the printer to perform the special processing required for bidirectionalcommunication following the conventions defined by the NPA protocolNotes:• Auto is the factory default setting.• Changing this setting from the printer control panel and then exiting the menuscauses the printer to restart. The menu selection is updated.Understanding printer menus171