Menu item DescriptionTray RenumberView Factory DefMultipurpose feeder default = 8Tray 1 default = 1Tray 2 default = 4Tray 3 default = 5Tray 4 default = 20Tray 5 default = 21Envelope default = 6Manual paper default = 2Manual envelope default = 3Lets you view the factory default setting assigned to each tray, drawer, or feederNotes:• The printer supports one standard 250-sheet tray and can have only oneoptional drawer installed, either the 250- or 550-sheet drawer. Therefore,only Tray 1 and Tray 2 of the Tray values apply to your printer• The factory default settings appear even if the source is not installed.Tray RenumberRestore DefaultsYesNoReturns all tray, drawer, and feeder assignments to the factory default settingsPPDS menuMenu item DescriptionOrientationPortraitLandscapeSets the orientation of the text and graphics on the pageNotes:• Portrait is the factory default setting.• Settings are duplicated in the PCL Emulation menu.Lines per Page1–255Sets the number of lines that print on each pageNotes:• 64 is the factory default setting.• The printer sets the amount of space between each line based on the Linesper Page, Paper Size, and Orientation settings. Select the desired PaperSize and Orientation before setting Lines per Page.Lines per Inch0.25–30.00Sets the number of lines that print per inchNotes:• 6 is the factory default setting.• Lines per Inch can be increased or decreased in 0.25-inch incrementsPage FormatPrintWholeSets the logical and physical printable area of the pageNotes:• Print is the factory default setting. Print data maintains its position withrespect to edge of the paper.• When Whole is selected, document margins are calculated from the topleft corner of the physical edge of the page.• Printing does not occur outside the printable area.Understanding printer menus223