Can send but not receive faxesThese are possible solutions. Try one or more of the following:CHECK TO SEE IF THE PAPER TRAY IS EMPTYLoad paper in the tray.CHECK THE RING COUNT DELAY SETTINGSThe ring count delay sets the number of times the phone line rings before the printer answers. If you have extensionphones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, thenkeep the Ring Delay setting at 4.1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP addressin the TCP/IP section.2 Click Settings.3 Click Fax Settings.4 Click Analog Fax Setup.5 In the Rings to Answer box, enter the number of times you want the phone to ring before answering.6 Click Submit.THE TONER MAY BE LOW88 Cartridge low appears when the toner is low.Can receive but not send faxesThese are possible solutions. Try one or more of the following:THE PRINTER IS NOT IN FAX MODEOn the home screen, touch Fax to put the printer in Fax mode.THE DOCUMENT IS NOT LOADED PROPERLYLoad the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upperleft corner.Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF. Place these items on the scanner glass.MAKE SURE THE SHORTCUT NUMBER IS SET UP PROPERLY• Check to make sure the shortcut number has been programmed for the number that you want to dial.• As an alternative, dial the telephone number manually.Troubleshooting277
