5 Touch the arrows to select a setting.6 Touch Submit.Submitting changes appears.Adjusting Power SaverTo save energy, you can decrease the number of minutes before the printer enters Power Saver mode.Available settings range from 1–240 minutes. The factory default setting is 30 minutes.Using the Embedded Web Server1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP addressin the TCP/IP section.2 Click Settings, and then click General Settings.3 Click Timeouts.4 In the Power Saver box, type in the number of minutes you want the printer to wait before it enters Power Savermode.5 Click Submit.Using the printer control panel1 Make sure the printer is on and Ready appears.2 On the home screen, touch .3 Touch Settings.4 Touch General Settings.5 Touch the down arrow until Timeouts appears.6 Touch Timeouts.7 Touch the arrows next to Power Saver Mode to select the number of minutes you want the printer to waitbefore it enters Power Saver mode.8 Touch Submit.9 Touch .Minimizing your printer's environmental impact71