PATTERNS (MOIRÉ) APPEAR IN THE OUTPUT• From the printer control panel, press the Content button until the light comes on next to Text/Photo.• Rotate the original document on the scanner glass.• From the printer control panel, press the Scale button and adjust the setting.TEXT IS LIGHT OR DISAPPEARINGFrom the printer control panel, press the Content button until the light comes on next to Text or Text/Photo.THE OUTPUT APPEARS WASHED OUT OR OVEREXPOSED• From the printer control panel, press the Content button until the light comes on next to Text/Photo or Photo.• From the printer control panel, press the Darkness button and change to a darker setting.THE PRINT IS SKEWEDNotes:• If you are loading your original document in the ADF, adjust the ADF paper guides so they touch the edgesof the pages to be scanned.• Check the paper trays to make sure the guides touch the edges of the loaded paper.Partial document or photo copiesThese are possible solutions. Try one or more of the following:CHECK THE DOCUMENT PLACEMENTMake sure the document or photo is loaded facedown on the scanner glass in the upper left corner.CHECK THE PAPER SIZE SETTINGMake sure the paper size setting matches the paper loaded in the tray:1 From the printer control panel Paper menu, check the Paper Size setting.2 Before sending the job to print, specify the correct size setting:• For Windows users, specify the size from Print Properties.• For Macintosh users, specify the size from the Page Setup dialog.Troubleshooting272
