Command Manual – ARPH3C S7500E Series Ethernet Switches Chapter 1 ARP Configuration Commands1-5verbose: Displays the detailed information about ARP entries.|: Uses a regular expression to specify the ARP entries to be displayed. For detailedinformation about regular expression, refer to the part discussing CLI display in SystemMaintaining and Debugging Configuration.begin: Displays the ARP entries from the first one containing the specified string.exclude: Displays the ARP entries that do not contain the specified string.include: Displays the ARP entries that contain the specified string.string: A case-sensitive string for matching, consisting of 1 to 256 characters.DescriptionUse the display arp ip-address command to display the ARP entry for a specified IPaddress.Related commands: arp static, reset arp.Examples# Display the corresponding ARP entry for the IP address 20.1.1.1. display arp 20.1.1.1Type: S-Static D-DynamicIP Address MAC Address VLAN ID Interface Aging Type20.1.1.1 000f-e200-0001 N/A N/A N/A S1.1.6 display arp timer agingSyntaxdisplay arp timer agingViewAny viewParametersNoneDescriptionUse the display arp timer aging command to display the aging time for dynamic ARPentries.Related commands: arp timer aging.Examples# Display the aging time for dynamic ARP entries.[Sysname] display arp timer aging
