Command Manual – Link AggregationH3C S7500E Series Ethernet Switches Chapter 1 Link Aggregation Configuration Commands1-61.1.5 display link-aggregation verboseSyntaxdisplay link-aggregation verbose [ agg-id ]ViewAny viewParametersagg-id: ID of an existing link aggregation group.DescriptionUse the display link-aggregation verbose command to display detailed informationabout the specified or all link aggregation groups.You may find that information about the remote system for a manual link aggregationgroup is either replaced by none or not displayed at all. This is normal because this typeof aggregation group has no knowledge of its partner.Examples# Display detailed information about all the link aggregation groups. display link-aggregation verboseLoadsharing Type: Shar -- Loadsharing, NonS -- Non-LoadsharingFlags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,D -- Synchronization, E -- Collecting, F -- Distributing,G -- Defaulted, H -- ExpiredAggregation ID: 1, AggregationType: Manual, Loadsharing Type: SharAggregation Description:System ID: 0x8000, 0000-fc00-6504Port Status: S -- Selected, U -- UnselectedLocal:Port Status Priority Oper-Key Flag-------------------------------------------------------------------------Eth2/0/23 S 32768 1 {}Remote:Actor Partner Priority Oper-Key SystemID Flag-------------------------------------------------------------------------Eth2/0/23 0 0 0 0x0000,0000-0000-0000 {}
