Command Manual – MulticastH3C S7500E Series Ethernet SwitchesChapter 6 Multicast Routing and ForwardingConfiguration Commands6-14DescriptionUse the multicast forwarding-table downstream-limit command to configure themaximum number of downstream nodes for a single route in the multicast forwardingtable.Use the undo multicast forwarding-table downstream-limit command to restore thesystem default.By default, the maximum number of downstream nodes for a single route in themulticast forwarding table is 128.Related commands: display multicast forwarding-table.Examples# Set the maximum number of downstream nodes for a single route in the multicastforwarding table to 120. system-view[Sysname] multicast forwarding-table downstream-limit 1206.1.10 multicast forwarding-table route-limitSyntaxmulticast forwarding-table route-limit limitundo multicast forwarding-table route-limitViewSystem viewParameterslimit: Maximum number of route entries in the multicast forwarding table. The valueranges 0 to the maximum allowable number.DescriptionUse the multicast forwarding-table route-limit command to configure the maximumnumber of route entries in the multicast forwarding table.Use the undo multicast forwarding-table route-limit command to restore themaximum number of route entries in the multicast forwarding table to the systemdefault.By default, the maximum number of route entries in the multicast forwarding table is1000.Related commands: display multicast forwarding-table.
