Command Manual – IPv6 ConfigurationH3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands1-7Field DescriptionHosts use stateless autoconfig foraddressesHosts use stateless auto-configurationmode to acquire IPv6 addresses# Display the brief IPv6 information of all interfaces for which IPv6 addresses can beconfigured. display ipv6 interface brief*down: administratively down(s): spoofingInterface Physical Protocol IPv6 AddressVlan-interface1 down down UnassignedVlan-interface2 up up 2001::1Vlan-interface100 up down UnassignedTable 1-6 Description on fields of display ipv6 interface briefField Description*down The interface is down, that is, the interface is closed by usingthe shutdown command.(s)Spoofing attribute of the interface, that is, the link protocol stateof the interface is up, but the link does not exist, or the link isestablished on demand, instead of being permanent.Interface Name of the interfacePhysical Physical state of the interfaceProtocol Link protocol state of the interfaceIPv6 AddressIPv6 address of the interface. Only the first of configured IPv6addresses is displayed. (If no address is configured for theinterface, “Unassigned” will be displayed.)1.1.6 display ipv6 neighborsSyntaxdisplay ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] |interface interface-type interface-number | vlan vlan-id } [ | { begin | exclude | include }text ]ViewAny view
