Command Manual – MulticastH3C S7500E Series Ethernet Switches Chapter 3 IGMP Configuration Commands3-4Host port(s):total 1 port.Eth1/0/1Table 3-2 Description on the fields of the display igmp group port-info commandField DescriptionTotal1 IP Group(s). Total number of IP multicast groupsTotal 1 IP Source(s). Total number of IP multicast sourcesTotal 1 MAC Group(s). Total number of MAC multicast groupsPort flags: D-Dynamic port,S-Static port, A-Aggregationport, C-Copy portPort flags: D for dynamic port, S for static port, A foraggregation port, C for port copied from a (*, G)entry to an (S, G) entrySubvlan flags: R-Real VLAN,C-Copy VLANSub-VLAN flags: R for real egress sub-VLANunder the current entry, C for sub-VLAN copiedfrom a (*, G) entry to an (S, G) entryRouter port(s) Number of router portsIP group address Address of IP multicast groupMAC group address Address of MAC multicast groupAttribute Attribute of IP multicast groupHost port(s) Number of host member ports3.1.3 display igmp interfaceSyntaxdisplay igmp interface [ interface-type interface-number ] [ verbose ]ViewAny viewParametersinterface-type interface-number: Specifies an interface to display the IGMP informationabout. If no interface is specified, this command will display the related information of allIGMP-enabled interfaces.verbose: Displays the detailed IGMP configuration and running information.DescriptionUse the display igmp interface command to view IGMP configuration and runninginformation of the specified interface or all IGMP-enabled interfaces.
