Command Manual – 802.1x - MAC AuthenticationH3C S7500E Series Ethernet SwitchesChapter 3 MAC Authentication ConfigurationCommands3-4parameters are configured before MAC authentication is enabled globally, thedefault values are used.z You can enable MAC authentication for ports before enabling it globally. However,MAC authentication begins to function only after you also enable it globally.Examples# Enable MAC authentication globally. systme-view[Sysname] mac-authenticationMac-auth is enabled globally.# Enable MAC authentication for port Ethernet 2/0/1. systme-view[Sysname] mac-authentication interface Ethernet 2/0/1Mac-auth is enabled on port Ethernet2/0/1.Or systme-view[Sysname] interface Ethernet 2/0/1[Sysname-Ethernet2/0/1] mac-authenticationMac-auth is enabled on port Ethernet2/0/1.3.1.3 mac-authentication domainSyntaxmac-authentication domain isp-nameundo mac-authentication domainViewSystem viewParametersisp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that cannotcontain any forward slash (/), colon (:), asterisk (*), question mark (?), less-than sign (<),greater-than sign (>), and @.DescriptionUse the mac-authentication domain command to specify the ISP domain for MACauthentication.Use the undo mac-authentication domain command to restore the default.By default, the default ISP domain (system) is used.
