Command Manual – MulticastH3C S7500E Series Ethernet Switches Chapter 5 MSDP Configuration Commands5-18ViewUser viewParameterspeer-address: Specifies an MSDP peer by its address. If you do not provide thisargument, the TCP connections with all MSDP peers will be reset.DescriptionUse the reset msdp peer command to reset the TCP connection with the specifiedMSDP peer or the TCP connections with all MSDP peers and clear all the statisticsinformation of the MSDP peer(s).Related commands: display msdp peer-status.Examples# Reset the TCP connection with the MSDP peer 125.10.7.6 and clear all the statisticsinformation of this MSDP peer. reset msdp peer 125.10.7.65.1.19 reset msdp sa-cacheSyntaxreset msdp sa-cache [ group-address ]ViewUser viewParametersgroup-address: Address of the multicast group related to which the (S, G) entries are tobe cleared from the MSDP cache. The effective range is 224.0.1.0 to 239.255.255.255.If you do not provide this argument, the command will clear all the cached (S, G)entries.DescriptionUse the reset msdp sa-cache command to clear (S, G) entries from the MSDP cache.Related commands: cache-sa-enable, display msdp sa-cache.Examples# Clear the (S, G) entries related to the multicast group 225.5.4.3 from the MSDPcache. reset msdp sa-cache 225.5.4.3
