Command Manual – SSHH3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands1-17Parametersserver: IPv6 address or name of the server, a string of 1 to 46 characters.port-number: Port number of the server, in the range 0 to 65535. The default is 22.prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted toaes128.z 3des: Encryption algorithm 3des-cbc.z aes128: Encryption algorithm aes128-cbc.z des: Encryption algorithm des-cbc.prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1.z md5: HMAC algorithm hmac-md5.z md5-96: HMAC algorithm hmac-md5-96.z sha1: HMAC algorithm hmac-sha1.z sha1-96: HMAC algorithm hmac-sha1-96.prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange.z dh-group-exchange: Key exchange algorithmdiffie-hellman-group-exchange-sha1.z dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.z dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.prefer-stoc-cipher: Preferred encryption algorithm from server to client, defaulted toaes128.prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1.DescriptionUse the sftp ipv6 command to establish a connection to a remote IPv6 SFTP serverand enter SFTP client view.Examples# Connect to server 2:5::8:9. sftp ipv6 2:5::8:9Input Username:1.1.20 sftp server enableSyntaxsftp server enableundo sftp server enableViewSystem view
