Command Manual – Information CenterH3C S7500E Series Ethernet SwitchesChapter 1 Information Center ConfigurationCommands1-11Table 1-9 Descriptions on the fields of the display trapbuffer commandField DescriptionTrapping bufferconfiguration and contentsIndicates the current state of the trap buffer and itscontents, which could be enabled or disabled.Allowed max buffer size The maximum buffer size allowedActual buffer size The actual buffer sizeChannel number The channel number of the trap buffer, defaults to 3Channel name The channel name of the trap buffer, defaults totrapbufferDropped messages The number of dropped messagesOverwritten messagesThe number of overwritten messages (when thebuffer size is not big enough to hold all messages,the latest messages overwrite the old ones).Current messages The number of the current messages1.1.8 info-center channel nameSyntaxinfo-center channel channel-number name channel-nameundo info-center channel channel-numberViewSystem viewParameterschannel-number: Specifies a channel number, in the range 0 to 9.channel-name: Specifies a channel name, a string of 1 to 30 characters, caseinsensitive. It must be an alphanumeric set startting with a letter.DescriptionUse the info-center channel name command to name a channel with a specifiedchannel number.Use the undo info-center channel command to restore the default name for a channelwith a specified channel number.Refer to Table 1-1 for details of default channel names and channel numbers.Examples# Name channel 0 as abc.
