Command Manual – Port Correlation ConfigurationH3C S7500E Series Ethernet SwitchesChapter 1 Ethernet Port ConfigurationCommands1-9DescriptionUse the display loopback-detection command to display loopback detectioninformation on a portIf loopback detection is already enabled, this command will also display the detectioninterval and information on the ports currently detected with a loopback.Examples# Display loopback detection information on a port. display loopback-detectionLoopback-detection is runningDetection interval time is 30 secondsNo port is detected with loopbackTable 1-4 Description on the fields of the display loopback-detection command.Field DescriptionLoopback-detection is running Loopback-detection is runningDetection interval time is 30 seconds Detection interval is 30 secondsNo port is detected with loopback No port is currently being detected with aloopback1.1.6 display port-group manualSyntaxdisplay port-group manual [all | name port-group-name ]ViewAny viewParametersall: Specifies all the manual port groups.name port-group-name: Specifies the name of a manual port group, a string of 1 to 32characters.DescriptionUse the display port-group manual command to display the information about amanual port group or all the manual port groups.z If you provide the port-group-name argument, this command displays the detailsfor a specified manual port group, including its name and the Ethernet portsincluded.
