Command Manual – DHCPH3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands1-11ParametersNoneDescriptionUse the display dhcp server forbidden-ip command to display IP addressesexcluded from dynamic allocation in DHCP address pool.Examples# Display IP addresses excluded from dynamic allocation in the DHCP address pool. display dhcp server forbidden-ipIP Range from 1.1.1.1 to 1.1.1.1IP Range from 2.2.2.2 to 2.2.2.51.1.15 display dhcp server ip-in-useSyntaxdisplay dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] }ViewAny viewParametersall: Displays the binding information of all DHCP address pools.ip ip-address: Displays the binding information of a specified IP address.pool [ pool-name ]: Displays the binding information of a specified address pool. Thepool name is a string of 1 to 35 characters. If no pool name is specified, the bindinginformation of all address pools is displayed.DescriptionUse the display dhcp server ip-in-use command to display the binding information ofDHCP address pool(s) or an IP address.Related commands: reset dhcp server ip-in-use.Examples# Display the binding information of all DHCP address pools. display dhcp server ip-in-use allGlobal pool:IP address Client-identifier/ Lease expiration TypeHardware address10.1.1.1 4444-4444-4444 NOT Used Manual
