Command Manual – MulticastH3C S7500E Series Ethernet Switches Chapter 3 IGMP Configuration Commands3-1Chapter 3 IGMP Configuration CommandsNote:The term “router” in this document refers to a router in a generic sense or a Layer 3switch running IGMP.3.1 IGMP Configuration Commands3.1.1 display igmp groupSyntaxdisplay igmp group [ group-address | interface interface-type interface-number ][ static | verbose ]ViewAny viewParametersgroup-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.interface interface-type interface-number: Displays the IGMP multicast groupinformation about a particular interface.static: Displays the information of statically joined IGMP multicast groupsverbose: Displays the detailed information of IGMP multicast groups.DescriptionUse the display igmp group command to view IGMP multicast group information.Note that:z If you do not specify group-address, this command will display the IGMPinformation of all the multicast groups.z If you do not specify interface-type interface-number, this command will displaythe IGMP multicast group information on all the interfaces.z If you do not specify the static keyword, this command will display the detailedinformation about the dynamically joined IGMP multicast groups.
