Command Manual – SNMP-RMONH3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands1-3DescriptionUse the display snmp-agent group command to display information for the SNMPagent group, including group name, security model, MIB view, storage type, and so on.Absence of the group-name parameter indicates that information for all groups will bedisplayed.Examples# Display the information of all SNMP agent groups. display snmp-agent groupGroup name: aaSecurity model: v3 noAuthnoPrivReadview: ViewDefaultWriteview: Notifyview: Storage-type: nonVolatileTable 1-2 Descriptions on the fields of the display snmp-agent group commandField DescriptionGroup name SNMP group nameSecurity modelSecurity model of the SNMP group, which can be: authPriv(authentication with privacy), authNoPriv (authentication withoutprivacy), or noAuthNoPriv (no authentication no privacy).Readview The read only MIB view associated with the SNMP groupWriteview The writable MIB view associated with the SNMP groupNotifyview The notify MIB view associated with the SNMP group, the viewwith entries that can generate Trap messagesStorage-type Storage type, which includes: volatile, nonVolatile, permanent,readOnly, and other. For detailed information, refer to Table 1-1.1.1.4 display snmp-agent mib-viewSyntaxdisplay snmp-agent mib-view [ exclude | include | viewname view-name ]ViewAny viewParametersexclude: Specifies to display SNMP MIB views of the excluded type.
