Command Manual – HAH3C S7500E Series Ethernet Switches Chapter 1 VRRP Configuration Commands1-18Field DescriptionVersion Errors Total number of packets with version errorsVRID Errors Total number of packets with VRID errors1.2.3 reset vrrp ipv6 statisticsSyntaxreset vrrp ipv6 statistics [ interface interface-type interface-number [ vridvirtual-router-id ] ]ViewUser viewParametersinterface interface-type interface-number: Clears VRRP statistics of a specificinterface. interface-type interface-number specifies an interface by its type and number.vrid virtual-router-id: Clears VRRP statistics of the specified standby group.virtual-router-id specifies a standby group by its group number, in the range 1 to 255.DescriptionUse the reset vrrp ipv6 statistics command to clear VRRP statistics.If you specify both the interface and standby group, the statistics about the specifiedstandby group on the specified interface are cleared; if you specify only the interface,the statistics about all the standby groups on the interface are cleared; if you specifyneither, the statistics about all the standby groups on the device are cleared.Examples# Clear the statistics about all the standby groups on the device. reset vrrp ipv6 statistics1.2.4 vrrp ipv6 vrid authentication-modeSyntaxvrrp ipv6 vrid virtual-router-id authentication-mode simple keyundo vrrp ipv6 vrid virtual-router-id authentication-modeViewInterface view
