Command Manual – QoSH3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands2-13DescriptionUse the remark dot1p command to configure the action of setting 802.1p precedencefor a traffic behavior.Use the undo remark dot1p command to remove the action of setting 802.1pprecedenceNote that, when the remark dot1p command is used together with the remarklocal-precedence command, the 802.1p precedence to be set for packets must be thesame as the local precedence to be set for packets. Otherwise, the correspondingpolicy cannot be applied successfully..Related commands: qos policy, traffic behavior, classifier behavior.Examples# Configure the action to set 802.1p precedence to 2 for a traffic behavior. system-view[Sysname] traffic behavior database[Sysname-behavior-database] remark dot1p 22.2.9 remark drop-precedenceSyntaxremark drop-precedence drop-precedence-valueundo remark drop-precedenceViewTraffic behavior viewParametersdrop-precedence-value: Drop precedence to be set for packets, in the range 0 to 2.DescriptionUse the remark drop-precedence command to configure the action of setting dropprecedence for a traffic behavior.Use the undo remark drop-precedence command to remove the action of settingdrop precedence.Related commands: qos policy, traffic behavior, classifier behavior.Examples# Configure the action to set drop precedence to 2 for a traffic behavior. system-view[Sysname] traffic behavior database
