Command Manual – Information CenterH3C S7500E Series Ethernet SwitchesChapter 1 Information Center ConfigurationCommands1-26self-defined channel name. For more information, refer to the info-center channelname command.DescriptionUse the info-center trapbuffer command to enable information output to the trapbuffer and set the corresponding parameters.Use the undo info-center trapbuffer command to disable information output to thetrap buffer.By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) asthe default channel and a maximum buffer size of 256.Note that the info-center trapbuffer command takes effect only after the informationcenter is enabled with the info-center enable command.Examples# Enable system to output information to the trap buffer using the default channel, witha default buffer size of 30. system-view[Sysname] info-center trapbuffer size 301.1.25 logfile saveSyntaxlogfile saveViewAny viewParametersNoneDescriptionUse the logfile save command to manually save the log buffer contents into the log file.By default, the system automatically saves the log file based on a frequency configuredby the info-center logfile frequency command into a directory configured by theinfo-center logfile switch-directory command.Note that all contents in the logfile buffer will be cleared after they are successfullysaved into the log file automatically or manually.
