Command Manual – IPv6 RoutingH3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands3-12DescriptionUse the display ospfv3 next-hop command to display OSPFv3 next hop information.If no process is specified, next hop information of all OSPFv3 processes is displayed.Examples# Display OSPFv3 next hop information. display ospfv3 next-hopOSPFv3 Router with ID (2.2.2.2) (Process 1)Neighbor-Id Next-Hop Interface RefCount1.1.1.1 FE80::20F:E2FF:FE00:1 Vlan100 1Table 3-6 Description on the fields of the display ospfv3 next-hop commandField DescriptionNeighbor-Id Neighboring router IDNext-hop Next-hop addressInterface Outbound interfaceRefCount Reference count3.1.10 display ospfv3 peerSyntaxdisplay ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ][ verbose ] | peer-router-id ]ViewAny viewParametersprocess-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.area: Specifies to display neighbor information of the specified area.area-id: The ID of an area, a decimal integer that is translated into IPv4 address formatby the system (in the range of 0 to 4294967295) or an IPv4 address.interface-type interface-number: interface type and number.verbose: Display detailed neighbor information.peer-router-id: Router-ID of the specified neighbor.
