Command Manual – DHCPH3C S7500E Series Ethernet Switches Chapter 3 DHCP Client Configuration Commands3-1Chapter 3 DHCP Client Configuration CommandsNote:z The DHCP client configuration is supported only on VLAN interfaces.z When multiple VLAN interfaces having the same MAC address use DHCP for IPaddress acquisition via a relay agent, the DHCP server cannot be the Windows2000 Server or Windows 2003 Server.z You are not recommended to enable both the DHCP client and the DHCP Snoopingon the same device. Otherwise, DHCP Snooping entries may fail to be generated,or the DHCP client may fail to obtain an IP address.3.1 DHCP Client Configuration Commands3.1.1 display dhcp clientSyntaxdisplay dhcp client [ verbose ] [ interface interface-type interface-number ]ViewAny viewParametersverbose: Specifies verbose DHCP client information to be displayed.interface interface-type interface-number: Specifies an interface of which to displayDHCP client information.DescriptionUse the display dhcp client command to display DHCP client information. If nointerface interface-type interface-number is specified, DHCP client information of allinterfaces will be displayed.Examples# Display DHCP client information of all interfaces. display dhcp clientVlan-interface1 DHCP client information:Current machine state: BOUND
